Advantech EKI-6333AC-4GP User Manual page 61

Item
Low Priority PD
Knockoff
PD Ping Check
PD No-response Action Specify the action to take when the PD doesn't reply the Ping
PD Power Overload
Time Schedule
Enable
Save
Description
Specify the Port Priority. It can be Highest, High, or Low.
Whenever there is a shortage of total power budget, the port with
lowest priority will be disabled automatically to provide required
power to the ports with higher priority.
If there are more than one ports with the same lowest priority, the
port number decide it, Port 1 > Port 2 > Port 3 > Port 4, it means
Port 4 has the lowest priority on such case.
Check Enable checkbox to activate PD Ping Check function. In
addition to enable the function, you have to specify a timeout value
for timeout check.
Value Range: 10 ~ 300 seconds.
check activity. (PD No-response). It could be No Action or Power
off/on.
Select Power off/on to restart the PD device, if required.
Specify the action to take when the PD Power overflow occurs for
a certain port. It can be No Action or Power Long Time Off/On.
If the Power overload occurs (PD consumes more power than the
value specified in the Power Limit setting), the PSE function for the
PoE port will be disabled for 30 minutes. That is, PD device will be
powered OFF for a long time, and then after 30minutes, it will be
powered ON again.
If you encountered such situation, please check if the Power Limit
setting is properly, or the PD device always consumes too much
power.
Apply Time Schedule to control the power ON/OFF schedule of the
connected PD, otherwise leave it as (0) Always.
If the drop-down menu is empty, ensure Time Schedule is
preconfigured. Refer to Object Definition > Scheduling >
Configuration.
Check Enable checkbox to enable the PoE port.
Click Save to save the settings.
49 EKI-6333AC-4GP User Manual