Figure 3.191 Service > Event Handling > Notifying Events > Notifying Event List; Figure 3.192 Service > Event Handling > Notifying Events > Notifying Event Configuration - Advantech EKI-6333AC-4GP User Manual

Setup your Notifying Event rules. It supports up to a maximum of 128 rules.
Figure 3.191 Service > Event Handling > Notifying Events > Notifying Event List
When Add button is applied, the Notifying Event Configuration screen appears.
Figure 3.192 Service > Event Handling > Notifying Events > Notifying Event
The following table describes the items in the previous figure.
Item
Event
Trigger Type
Interval
Description
Configuration
Description
Specify the event type and corresponding event configuration. The
supported event type could be:

Digital Input: Select Digital Input and a DI profile you
defined to specify a certain Digital Input Event.

WAN: Select WAN and a trigger condition to specify a certain
WAN Event.

LAN&VLAN: Select LAN&VLAN and a trigger condition to
specify a certain LAN&VLAN Event.

WiFi: Select WiFi and a trigger condition to specify a certain
WiFi Event.

DDNS: Select DDNS and a trigger condition to specify a
certain DDNS Event.

Administration: Select Administration and a trigger
condition to specify a certain Administration Event.

Modbus: Select Modbus and a Modbus Notifying Event
profile you defined to specify a certain Modbus Event.
Note:
The available event type could be different for the purchased
product.
Specify the trigger type (Period or Once).

Period: Event will be executed in a period set by Interval
below.

Once: Event will be executed just once.
The function is only available when Trigger Type is Period. Time
interval for event execution in period.
Value Range: 0 ~ 86400 seconds.
Enter a brief description for the Notifying Event.
129 EKI-6333AC-4GP User Manual