Advantech EKI-6333AC-4GP User Manual page 68

Item
SSID
Max. STA
Authentication
EKI-6333AC-4GP User Manual
Description
Enter the SSID for the VAP, and decide whether to broadcast the
SSID or not. The SSID is used for identifying from another AP, and
client stations will associate with AP according to SSID.
Check this box and enter a limitation to limit the maximum number
of client station. The box is unchecked by default. It means no
special limitation on the number of connected STAs.
For security, there are several authentication methods supported.
Client stations should provide the key when associate with this
device.

Open
When is selected
The check box named 802.1x shows up next to the drop-
down menu.
–
802.1x (The box is unchecked by default)
When 802.1x is enabled, it means the client stations will
be authenticated by RADIUS server.
–
RADIUS Server IP (The default IP is 0.0.0.0)
–
RADIUS Server Port (The default value is 1812)
–
RADIUS Shared Key

When Shared is selected
The pre-shared WEP key should be set for authenticating.

When Auto is selected
The device will select Open or Shared by requesting of client
automatically.
The check box named 802.1x shows up next to the drop-
down menu.
–
802.1x (The box is unchecked by default)
When 802.1x is enabled, it means the client stations will
be authenticated by RADIUS server.
–
RADIUS Server IP (The default IP is 0.0.0.0)
–
RADIUS Server Port (The default value is 1812)
–
RADIUS Shared Key

When WPA or WPA2 is selected
They are implementation of IEEE 802.11i. WPA only had
implemented part of IEEE 802.11i, but owns the better
compatibility. WPA2 had fully implemented 802.11i standard,
and owns the highest security.
–
RADIUS Server
The client stations will be authenticated by RADIUS
server.
–
RADIUS Server IP (The default IP is 0.0.0.0)
–
RADIUS Server Port (The default value is 1812)
–
RADIUS Shared Key

When WPA / WPA2 is selected
It owns the same setting as WPA or WPA2. The client
stations can associate with this device via WPA or WPA2.

When WPA-PSK or WPA2-PSK is selected
It owns the same encryption system as WPA or WPA2. The
authentication uses pre-shared key instead of RADIUS
server.

When WPA-PSK / WPA2-PSK is selected
It owns the same setting as WPA-PSK or WPA2-PSK. The
client stations can associate with this device via WPA-PSK or
WPA2-PSK.
56