Table of Contents
Advertisement
Figure 3.31 Basic Network > WAN & Uplink > Connection Setup > Network
The following table describes the items in the previous figure.
Item
Network Monitoring
Configuration
Checking Method
Loading Check
Query Interval
Latency Threshold
Fail Threshold
Target1
Target2
Save
Undo
EKI-6333AC-4GP User Manual
Monitoring Configuration
Description
When the Network Monitoring feature is enabled, the gateway will
use DNS Query or ICMP to periodically check Internet connection
– connected or disconnected.
Select either DNS Query or ICMP Checking to detect WAN link.
With DNS Query, the system checks the connection by
sending DNS Query packets to the destination specified in
Target 1 and Target 2.
With ICMP Checking, the system will check connection by
sending ICMP request packets to the destination specified in
Target 1 and Target 2.
Enable Loading Check allows the router to ignore unreturned DNS
Queries or ICMP requests when WAN bandwidth is fully occupied.
This is to prevent false link-down status.
Defines the transmitting interval between two DNS Query or ICMP
checking packets.
Defines the tolerance threshold of responding time.
Specifies the detected disconnection before the router recognize
the WAN link down status. Enter a number of detecting
disconnection times to be the threshold before disconnection is
acknowledged.
Specifies the first target of sending DNS query/ICMP request.
DNS1: set the primary DNS to be the target.
DNS2: set the secondary DNS to be the target.
Gateway: set the Current gateway to be the target.
Other Host: enter an IP address to be the target.
Specifies the second target of sending DNS query/ICMP request.
None: to disable Target2.
DNS1: set the primary DNS to be the target.
DNS2: set the secondary DNS to be the target.
Gateway: set the Current gateway to be the target.
Other Host: enter an IP address to be the target.
Click Save to save the settings.
Click Undo to cancel the settings.
38
Advertisement
Table of Contents
