Table of Contents
Advertisement
4.5
SNMP
You can set the SNMP Community and SNMP Trap setting here
4.5.1
Agent Settings
SNMP Agent provides a simple protection. Access to the SNMP device is
controlled through community names. The community name can be
thought of as a password. If you don't have the correct community name,
you can't retrieve any data (get) or make any change (set). Multiple
SNMP managers may be organized in a specified community. You can
change your SNMP community settings on this screen. Check the
"Enable" check box to turn on SNMP daemon. Click APPLY to complete
your change.
Read Only Community: Specify the name of community for read only
access.
Read Write Community: Specify the name of community for read and
write access.
4.6
EXIT
Figure 4-14
35
Advertisement
Table of Contents
