Table of Contents
Advertisement
4.5
SNMP
You can set the SNMP Community and SNMP Trap setting here
4.5.1
Agent Settings
SNMP Agent provides a simple protection. Access to the SNMP device is controlled
through community names. The community name can be thought of as a
password. If you don't have the correct community name, you can't retrieve any
data (get) or make any change (set). Multiple SNMP managers may be organized
in a specified community. You can change your SNMP community settings on this
screen. Check the "Enable" check box to turn on SNMP daemon. Click APPLY to
complete your change.
Read Only Community : Specify the name of community for read only access.
Read Write Community : Specify the name of community for read and write
access.
4.6
EXIT
Figure 4-14
37
Advertisement
Table of Contents
