Advantech EKI-6333AC-4GP User Manual page 80

Item
Group
Service
Resource and Control
Function
EKI-6333AC-4GP User Manual
Description
Specify the Group category for the QoS rule. It can be Src. MAC
Address, IP, or Host Name.

Select Src. MAC Address to prioritize packets based on
MAC.

Select IP to prioritize packets based on IP address and
subnet mask.

Select Host Name to prioritize packets based on a group of a
preconfigured group of host from the drop-down menu. If the
drop-down menu is empty, ensure if any group is
preconfigured.
Note:
The required host groups must be created in advance and
corresponding QoS checkbox in the Multiple Bound Services
field is checked before the Host Group option become
available. Refer to Object Definition > Grouping > Host
Grouping.
Specify the service type of traffics that have to be applied with the
QoS rule. It can be All, DSCP, TOS, User-defined Service, or
Well-known Service.

Select All for all packets.

Select DSCP for DSCP type packets only.

Select TOS for TOS type packets only. You have to select a
service type (Minimize-Cost, Maximize-Reliability, Maximize-
Throughput, or Minimize-Delay) from the drop-down menu as
well.

Select User-defined Service for user-defined packets only.
You have to define the port range and protocol as well.

Select Well-known Service for specific application packets
only. You have to select the required service from the drop-
down menu as well.
Specify the Resource Type and corresponding Control function for
the QoS rule. The available Resource options are Bandwidth,
Connection Sessions, Priority Queues, and DiffServ Code
Points.

Bandwidth: Select Bandwidth as the resource type for the
QoS rule, and you have to assign the min rate, max rate and
rate unit as the bandwidth settings in the Control Function /
Set MINR & MAXR field.

Connection Sessions: Select Connection Sessions as the
resource type for the QoS rule, and you have to assign
supported session number in the Control Function / Set
Session Limitation field.

Priority Queues: Select Priority Queues as the resource
type for the QoS rule, and you have to specify a priority
queue in the Control Function / Set Priority field.

DiffServ Code Points: Select DiffServ Code Points as the
resource type for the QoS rule, and you have to select a
DSCP marking from the Control Function / DSCP Marking
drop-down menu.
68