Figure 3.34 Basic Network > Wan & Uplink > Load Balance; Figure 3.35 Basic Network > Wan & Uplink > Load Balance > User Policy Configuration - Advantech EKI-6333AC-4GP User Manual

When By User Policy is selected, a User Policy List screen appears. With properly
configured your policy rules, system will route traffics through available WAN
interface based on user defined rules.
Figure 3.34 Basic Network > WAN & Uplink > Load Balance
When Add button is applied, the User Policy Configuration appears.
Figure 3.35 Basic Network > WAN & Uplink > Load Balance > User Policy
The following table describes the items in the previous figure.
Item
Source IP Address
Destination IP Address
Destination Port
Protocol
WAN Interface
EKI-6333AC-4GP User Manual
Configuration
Description
There are four options can be selected:

Any: No specific Source IP is provided. The traffic may come
from any source.

Subnet: Specify the Subnet for the traffics come from the
subnet. Input format is: xxx.xxx.xxx.xxx/xx e.g.
192.168.123.0/24.

IP Range: Specify the IP Range for the traffics come from the
IPs.

Single IP: Specify a unique IP Address for the traffics come
from the IP. Input format is: xxx.xxx.xxx.xxx e.g.
192.168.123.101.
There are five options can be selected:

Any: No specific destination IP is provided. The traffic may
come to any destination.

Subnet: Specify the Subnet for the traffics come to the
subnet. Input format is: xxx.xxx.xxx.xxx/xx e.g.
192.168.123.0/24.

IP Range: Specify the IP Range for the traffics come to the
IPs.

Single IP: Specify a unique IP Address for the traffics come
to the IP. Input format is: xxx.xxx.xxx.xxx e.g.
192.168.123.101.

Domain Name: Specify the domain name for the traffics
come to the domain.
There are four options can be selected:

All: No specific destination port is provided.

Port Range: Specify the Destination Port Range for the
traffics.

Single Port: Specify a unique destination Port for the traffics.

Well-known Applications: Select the service port of well-
known application defined in drop-down menu.
There are three options can be selected. They are Both, TCP, and
UDP.
User can select the interface that traffic should go.
Note that the WAN interface drop-down menu will only show the
available WAN interfaces.
40