Figure 3.24 Basic Network > Wan & Uplink > Connection Setup; Figure 3.25 Basic Network > Wan & Uplink > Connection Setup > Internet Connection Configuration - Advantech EKI-6333AC-4GP User Manual

Item
Operation Mode
VLAN Tagging
3.3.1.2 Connection Setup
To access this page, click Basic Network > WAN & Uplink > Connection Setup.
Figure 3.24 Basic Network > WAN & Uplink > Connection Setup
When Edit button is applied, the Internet Connection Configuration screen
appears. WAN-1 interface is used in this example.
Figure 3.25 Basic Network > WAN & Uplink > Connection Setup > Internet
The following table describes the items in the previous figure.
Item
WAN Type
Description
Define the operation mode of the interface.

Select Always on to make this WAN always active.

Select Disable to disable this WAN interface.

Select Failover to make this WAN a failover WAN when the
primary or the secondary WAN link failed. Then select the
primary or the existed secondary WAN interface to switch
failover from.
Note:
For WAN-1, only Always on option is available.
Check Enable checkbox to enter tag value provided by your ISP.
Otherwise uncheck the box.
Value Range: 1 ~ 4096.
Note:
This feature is NOT available for 3G/4G WAN connection.
Connection Configuration
Description
Click the drop-down menu to select WAN type, options: Static IP,
Dynamic IP (Default), PPPoE, PPTP, or L2TP.
31 EKI-6333AC-4GP User Manual