Bdcom S2952P Hardware Installation Manual page 21

No. Abbrev.
1 PWR
2 SYS
3 POE
4 LINKACT
Name
Power indicator
System indicator
POE indicator
port indicator
BDCOM S2952P Hardware Installation Manual
Description
When the switch is powered on, the
indicator is on.
When the indicator is always on, the
system is being started up.
When the indicator flickers, the system
works well.
If the indicator is always on, it indicates
the state of power supply.
If the indicator is off, it indicates the state
of LINK/ACK.
The POE indicator is off by default.
Press SWAP and the indicator is on.
If the indicator is on, the Ethernet port
indicator indicates POE power supply.
The indicator will automatically turn off
after a while.
- 18 -