Replacing A Clp - Siemens SIMATIC NET SCALANCE XC-300 Operating Instructions Manual

6.8

Replacing a CLP

To use the CLP correctly, note the structure of the CLP:
①
②
③
Removing a CLP
To remove a CLP from the device, follow the steps below:
1. Turn off the power to the device.
2. To release the CLP, insert a screwdriver between the front edge of the CLP
3. Remove the CLP from the slot.
Inserting the CLP
To insert a CLP into the device, follow the steps below:
1. Turn off the power to the device.
2. The CLP housing has two square
has two square and two round edges. Note this orientation when inserting the CLP.
Insert the CLP in the correct orientation into the slot.
SCALANCE XC-300
Operating Instructions, 10/2022, C79000-G8976-C584-01
Square edges
Front edge of the CLP
Round edges
① ③
and two round edges. Accordingly, the slot opening
Connecting up
6.8 Replacing a CLP
②
and the slot.
67