Table of Contents
Advertisement
Certifications and approvals
Note for devices with CLASS 1 LASER
Important note on products certified according to Type Examination Certificate KEMA
07ATEX0145 X as of Issue 95 / DEKRA 18ATEX0025 X and IECEx Certificate of Conformity DEK
14.0025X as of Issue 43 / DEK 18.0017X and containing Class 1 optical radiation sources.
Note
CLASS 1 LASER
The device contains optical radiation sources which comply with the limits of Class 1 according
to IEC 60825-1. Fiber-optic cables connected to these optical radiation sources may therefore be
routed either to or through hazardous areas requiring Category 2G, 3G, 2D or 3D equipment.
EMC (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the electromagnetic
compatibility requirements according to the EU Directive 2014/30/EU as well as the UK-
Regulation SI 2016/1091 and their associated amendments.
Applied standards:
• EN 61000‑6‑2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity
for industrial environments
• EN 61000‑6‑4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments
You will find the current versions of the standards in the currently valid EC/UK Declaration of
Conformity.
RoHS
The SIMATIC NET products described in these operating instructions meet the requirements on
the restriction of the use of certain hazardous substances in electrical and electronic equipment
according to the EU Directive 2011/65/EU as well as the UK-Regulation SI 2012/3032 and their
associated amendments.
Applied standard:
• EN IEC 63000
FM
The product meets the requirements of the standards:
• Factory Mutual Approval Standard Class Number 3611
• FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
96
Operating Instructions, 10/2022, C79000-G8976-C584-01
SCALANCE XC-300
Advertisement
Table of Contents
