Error/Fault; Decommissioning; Recycling And Disposal; Trademarks - Siemens SIMATIC NET SCALANCE XC-300 Operating Instructions Manual

Introduction

1.9 Trademarks

1.6

Error/fault

If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site are
not permitted.
1.7

Decommissioning

Shut down the device properly to prevent unauthorized persons from accessing confidential
data in the device memory.
To do this, restore the factory settings on the device.
Also restore the factory settings on the storage medium.
1.8

Recycling and disposal

The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return
support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
1.9 Trademarks
The following and possibly other names not identified by the registered trademark sign ® are
registered trademarks of Siemens AG:
• SCALANCE
• SINEC
10
Operating Instructions, 10/2022, C79000-G8976-C584-01
(https://
SCALANCE XC-300