Buttons - Huawei UPS2000-G-6KRTLL User Manual

UPS2000-G-6KRTLL
User Manual

4.1.2 Buttons

Figure 4-1 Buttons on the UPS control panel
● If you do not press any button on the UPS control panel, the default screen is displayed after
Table 4-2 Button description
No.
1
Issue 02 (2022-06-30)
NO TE
60s.
Button
ON/MUTE
Copyright © Huawei Technologies Co., Ltd.
Function
● Start the UPS: Press ON/MUTE.
The UPS LCD lights up.
● Start the UPS inverter: Hold
down ON/MUTE for more than
5s. The UPS inverter starts.
● Stop the buzzer: If there is an
alarm, hold down ON/MUTE for
more than 2s in non-setting
mode to mute the current alarm.
When the UPS reports a new
alarm, the mute function
becomes ineffective. If you need
to mute the alarm, perform the
mute operation again.
● Go to the previous item: When
the LCD is on, press ON/MUTE
to go to the previous item.
4 Control Panel
41