Huawei UPS2000-G-6KRTLL User Manual page 13

UPS2000-G-6KRTLL
User Manual
General Requirements
●
●
●
●
●
●
●
●
To ensure battery safety and battery management accuracy, use batteries provided
by the Company. The Company is not responsible for any battery faults caused by
batteries not provided by it.
Battery Leakage
●
●
Flammable Gas
●
●
Issue 02 (2022-06-30)
If a battery is accidentally exposed to water, do not install it. Move it to a safe
place for isolation and contact technical engineers in a timely manner.
Keep the battery switch off during installation and maintenance.
When installing batteries, do not place installation tools on the batteries.
After the installation is complete, clean up the objects on the batteries and
the surrounding area.
Use batteries of specified models. Using batteries of other models may
damage the batteries.
Note the polarities when installing batteries. Do not short-circuit the positive
and negative poles of the same battery or battery string. Otherwise, the
battery may be short-circuited.
Exercise caution when setting battery parameters. Incorrect settings will affect
the power supply and battery lifespan.
Do not charge a battery when the ambient temperature is below the lower
limit of the operating temperature (charging is forbidden at 0°C). Low-
temperature charging may cause crystallization, which will result in a short
circuit inside the battery.
Dispose of waste batteries in accordance with local laws and regulations. Do
not dispose of batteries as household waste. If a battery is disposed of
improperly, it may explode.
NO TICE
If a battery leaks, wear goggles, rubber gloves, and protective clothing, power
off the equipment in a timely manner, remove the leaking battery module
from the cabinet, and contact technical support.
If a battery overflows, protect the skin or eyes from the leaking liquid. If the
skin or eyes come in contact with the leaking liquid, wash it immediately with
clean water and go to the hospital for medical treatment.
A battery module is an enclosed battery system and will not release any gases
under normal operations.
If a battery module is improperly treated, for example, burnt, needle-pricked,
squeezed, overcharged, or subject to other adverse conditions that may cause
battery thermal runaway, the battery may be damaged or an abnormal
chemical reaction may occur inside the battery, resulting in electrolyte
leakage or production of gases such as CO
corrosion, ensure that flammable gas (such as hydrogen) is properly
exhausted.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
, CO, N , and H . To prevent fire or
2 2 2
7