Reset Modes: A Brief Summary; Setup Menu - Extron electronics TLP Pro 320C Setup Manual

TLP Pro 320C • Setup Guide (Continued)

Reset Modes: a Brief Summary

The TLP Pro 320C offers the following reset modes (see the TLP Pro 320C User Guide for complete information):
Use factory firmware:
•
Reset All IP Settings:
•
Reset to Factory Defaults:
•

Setup Menu

The setup menu opens when the menu button is pressed (see
Panel Features, G ). The image to the right shows the entire
screen. Because of size of the touchscreen, you can only see part of
the screen at any time. Use your finger to scroll up or down
Status
within the screen.
There are five different screens:
right) , ,
Network Display
selected by pressing the
or by pressing the light gray bar with the name of the destination
screen. An arrow to the right of the bar indicates that the bar links
to another screen (for more information about each screen, see the
TLP Pro 320C User Guide).
Press the button for at least 3 seconds to open the calibration
Menu
screen. Follow the on-screen instructions.
Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only)
Extron USA - West Extron USA - East
+1.714.491.1500 +1.919.850.1000
+1.714.491.1517 FAX +1.919.850.1001 FAX
© 2015 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners.
8
Press and hold the
power to the unit. Use this mode to replace firmware in the event of firmware failure.
Press and hold the
(approximately 6 seconds). Release and momentarily press the
mode to reset all network settings without affecting user-loaded files.
Press and hold the
9 seconds). Release and momentarily press the
interface to factory default settings.
, (shown in the figure to the
Status
, and . The screens can be
Audio Advanced
button at the top left of the screen
Menu
Extron Europe Extron Asia
+800.3987.6673 +65.6383.4400
(Inside Europe Only)
+65.6383.4664 FAX
+31.33.453.4040
+31.33.453.4050 FAX
button (see Front Panel
Reset
until the Reset LED (see
Reset
button until the Reset LED blinks three times (approximately
Reset
Reset
Front
Status
Status
INFO
Model:
Part Number:
Firmware Version:
Bootloader Version:
PoE:
NETWORK
DHCP:
Hostname:
IP Address:
DISPLAY
Screen Resolution:
Sleep Timer:
AUDIO
Master Volume:
Master Mute:
ADVANCED
Controller IP:
Storage Usage:
Extron Japan Extron China
+81.3.3511.7655 +86.21.3760.1568
+81.3.3511.7656 FAX +86.21.3760.1566 FAX
Features, F , on page 7) while applying
Front Panel Features, ) blinks twice
E
button. Use this
Reset
button. Use this mode to return the
TLP Pro 320C
60-1452-02
1.03.0000.b001
TLP-Pro-320C-AB-CD-EF
192.168.254.251
192.168.254.250
Extron Middle East Extron Korea
+971.4.299.1800 +82.2.3444.1571
+971.4.299.1880 FAX +82.2.3444.1575 FAX
www.extron.com
Exit
1.03.0000
Active
Off
320x240
5 Minutes
80
Off
1/151 MB
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
+91.80.3055.3737 FAX
68-2516-50 Rev. A
05 15