Aiom Network Cards - Supermicro SYS-521C-NR User Manual

AIOM Network Cards

The system provides network connection by means of one advanced I/O module (AIOM).
Installing an AIOM Card
1. Remove the blank cover plate from A1 by unscrewing the thumbscrew.
2. Slide the AIOM card into the opening until it seats in the motherboard slot.
3. Secure with the thumbscrew.
Note: System power must be turned off before removing or installing AIOM cards.
Chapter 3: Maintenance and Component Installation
Figure 3-6. AIOM Slot
Figure 3-7. Installing AIOMs
43
A1