Hot-Swap For Nvme Drives - Supermicro SYS-521C-NR User Manual

Hot-Swap for NVMe Drives

Supermicro servers support NVMe surprise hot-swap. For even better data security, NVMe
orderly hot-swap is recommended. NVMe drives can be ejected and replaced remotely using
IPMI.
Ejecting a Drive
1. IPMI > Storage > Physical View
2. Select Device and click Eject. After ejecting, the drive Status LED indicator turns green.
3. Remove the drive.
Slot is the slot number on which the NVMe drives are mounted.
Replacing the Drive
1. Insert the replacement drive.
2. IPMI > Storage > Physical View
3. Select Device and click Insert. The drive Status LED indicator flashes red, then turns off.
The Activity LED turns blue.
Chapter 3: Maintenance and Component Installation
Figure 3-14. IPMI Screenshot
49