Appendix B System Specifications - Supermicro SYS-521C-NR User Manual

Appendix B: System Specifications
Appendix B
System Specifications
Processor Support
Single 4th Generation Intel Xeon Scalable processor, P+ (LGA4189) sockets; up to 350W TDP
Notes: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel PCH C741
BIOS
AMI BIOS; ACPI 3.0 or later, PCI firmware 4.0 support, BIOS rescue hot-key, SPI dual/quad speed support, RTC (Real Time
Clock) wakeup, and SMBIOS 3.0 or later
Memory Support
16 DIMM slots to support up to 4TB DDR5 RDIMM to 4800MT/s
Storage Drives
Twelve hot-swap 3.5" SATA (default) drive bays
Optional NVMe drive bays by additional cables or SAS3 via optional AOC)
Two M.2 PCIe 3.0 x2 M-Key NVMe
PCI Expansion Slots
Two PCIe 5.0 x16 slots (FHHL)
Four PCIe 5.0 x8 slots (FHFL) (default configuration)
One PCIe 5.0 x16 AIOM slot (default)
Input/Output
One RJ45 dedicated IPMI LAN port
Two USB 3.2 Gen1 ports (rear)
Two USB 2.0 ports (header)
One VGA port
One serial (COM) port (rear)
Motherboard
X13SEDW-F: 13.4" x 12.29" (34.04 x 31.22cm)
Chassis
CSE-LA26TS-R1K23AWP1; 2U Rackmount, (WxHxD) 17.2 x 3.5 x 25.5 in. (43.7 x 8.6 x 64.8 cm)
System Cooling
Three 8-cm PWM fans
Power Supply
PWS-1K23A-1R, 1200W redundant modules, 80Plus Titanium level
Input:
1000W at 100-127Vac
1200W at 200-240Vac
1200W at 240Vdc (CCC only)
50-60Hz
Output
+12V 100A (1200W)
+12V 83A (1000W)
+ 5Vsb 4A
103