Optex ViiK Exposed Type OVS-02GT Series Installation Instructions Manual page 23

7-3
Status
Status
Application Gate - Protection
Detection status
Detection
Pre-detection (Area check)
Detection beep
Detection
Pre-detection (Area check)
Installation guide
Area check mode
Output1 hold
Output2 hold
Input status
Inhibit input
Calibration
NOTE
Detection and Pre-detection
"Detection" indicates the sensor's detection status. Use this as a check for actual operation.
"Pre-detection" indicates if the sensor has captured an object. If "Detection" is indicated in
"Pre-detection" even when it is not a time for a detection response, the orientation or settings of
the sensor may be incorrect, or the peripheral environment may be causing incorrect detection.
CAUTION
Calibration
Change by tapping Menu icon > Favorite > Select application.
[1] Detection
This indicates the detection status of the sensor.
Non-detection
(Updated approximately once per second. )
Detection
[2] Pre-detection (Area check)
This indicates whether the sensor has started a
detection response or not.
(Updated approximately once per second. )
[3] Detection
[4] Pre-detection (Area check)
A beep sound is made when the detection
(pre-detection) status changes.
[5] Area check mode
When this is ON, the sensor detects moving objects such
as vehicles and pedestrians. Use this for checking the area.
If the operation indicator keeps blinking in blue
(non-detection status) for 30 seconds, this will automatically
change back to normal operation mode.
[6] Output hold
Outputs from the sensor can continuously be ON. Use this
for checking the system operation while outputs are active.
[7] Input status
Inputs can continuously be ON. Use this for checking the
system operation while inputs are active.
[8] Inhibit input
The sensor will keep operating without changing its
operation even if it receives inputs. Use this for checking
the system operation while inputs are not active.
* Installation guide items will be automatically turned OFF when a user logs out from
the sensor, or when the connection between the sensor and smartphone is lost.
detection oversight is observed.
Be sure to perform this action when there are no vehicles or pedestrians in the area.
-23-