Optex ViiK Exposed Type OVS-02GT Series Installation Instructions Manual page 15

6
Installation Steps (Basic)
6-1
Preparation for Installation
When installing on a round pole
1
2
make pilot holes of ø4.3mm (0.17in.), and secure the unit using nuts. After making holes, deburr the surface
to preserve the waterproof property.
actions, such as making pilot holes, according to the target material.
We cannot be held liable for any negative effect on the target material.
Wiring hole position
* Wiring holes on the back (other than ø5 (0.20in.)
and 6 (0.24in.), two positions on the left and right)
25 (0.98)
56 (2.2)
Embedded hole
76 (3.0)
* Caution on installing OVS-02B
(3.5in.) on each side or larger.
interior.
-15-
Pole mounting brackets × 2
* Applicable pole diameter
ø60.5mm (2.4in.)
Installation
pitch
45 (1.8)
±4 (±0.16)
±1 (±0.04)
[Unit: mm (in.)]