5. Install the slot bracket.
6. Reconnect the computer power supply.
7. Turn on the computer and start Windows.
Windows detects the new hardware and completes the driver installation.
3.3 Check Operational Readiness
1. Open the Windows Start menu.
2. Type Peak Settings and press |Enter|.
The window PEAK Settings appears.
3. Select CAN Hardware.
The connected CAN interface is displayed.
Under Windows the CAN interface PCAN-PC/104 Plus is run as a PCI
card.
3 Installation
PCAN-PC/104 Plus
User Manual 3.0.1
© 2022 PEAK-System Technik GmbH
13