Transmit Can Message - Peak PCAN-PC/104 Plus User Manual

5.2 Transmit CAN message

1. Select the menu command Transmit / New Message.
Depending on the CAN interface, the dialog box New Transmit Message is
displayed with or without settings for CAN FD.
CAN
1. Enter the ID, Length and Data of the message. Other settings can be made
according to the connected CAN bus.
2. Enter a value into the Cycle Time field to choose manually or periodically message
transmission.
Enter a value greater than 0 to transmit periodically.
Enter the value 0 to transmit only manually.
3. Confirm the entries with OK.
The created transmit message appears on the Receive / Transmit tab.
4. To send the message manually, select the menu command Transmit > Send or
press the |space|
The manual transmission process is performed additionally for periodically
transmitted CAN messages.
5 CAN Monitor PCAN-View
User Manual 3.0.1 © 2022 PEAK-System Technik GmbH
bar.
PCAN-PC/104 Plus
CAN FD
20