Notes For The Isa Bus Stack-Through Connection - Peak PCAN-PC/104 Plus User Manual

D-Sub connector
CAN 1
CAN 2

2.3 Notes for the ISA Bus Stack-through Connection

If you want to use additional modules in the PC/104 stack being connected via the
ISA bus, the connections J1 and J2 must be equipped with stack-through connectors.
On request you get a respective version of the CAN interface.
Taking the host as point of view, PC/104 modules with ISA bus must be plugged onto
the stack behind any module with PCI bus. The signals of the ISA bus are connected
through and not used by the CAN interface PCAN-PC/104 Plus.
2 Configuration PCAN-PC/104 Plus
User Manual 3.0.1 © 2022 PEAK-System Technik GmbH
Solder field Without
(Standard)
JP1
JP2
5-Volt supply
Pin 1 Pin 9 Pin 1 and
pin 9
10