Install Can Interface - Peak PCAN-PC/104 Plus User Manual

3.2 Install CAN interface

Attention! Electrostatic discharge (ESD) can damage or destroy
components on the card. Take precautions to avoid ESD.
1. Connect one cable per CAN connection from the slot bracket to a 10-pin socket
on the CAN interface.
2. Shut down the computer.
3. Disconnect the computer's power supply.
4. Insert the CAN interface into the PC/104-Plus computer at the position configured
before (Position 1 to 4).
3 Installation PCAN-PC/104 Plus
User Manual 3.0.1 © 2022 PEAK-System Technik GmbH
12