Installation - Conrad Electronic 75 15 32 Operating Instructions Manual

When drilling or tightening screws, make sure not to accidentally damage any power
supply lines or gas or water pipes. Danger to life!

6.2 Installation

Proceed as follows to ensure proper installation on the wall:
Keep to the prescribed installation height.
The recommended installation height is from 2.4 m to 3.2 m.
Use an even and solid surface for installation. The device might be
damaged if it is dropped even from a low height.
Loosen the fixing screw (8).
Pull the housing apart carefully as shown to the left.
Choose a suitable installation position for the surveillance cam-
era in the designated room.
At the installation position, hold the surveillance camera against
the wall.
Use a sharp pencil to mark the installation holes (9) on the wall.
Depending on the wall, you might have to drill holes and use
suitable wall plugs.
Attach the surveillance camera to the wall using appropriate
mounting material (see illustration to the left, 2).
23