Operating Elements; Installation And Connection - Conrad Electronic 75 15 09 Operating Instructions Manual

4. Operating elements

Illustration see fold-out page
1) Aerial
2) LED link
3) Power LED
4) Camera lens
5) IR LED
6) Photo sensor
7) Support
8) DC IN 5 V/DC 1A
9) Button Pairing
10) Microphone
11) Aerial
12) A/V out

5. Installation and connection

Find a suitable place for mounting from which the area to be monitored can be
observed.
A suitable place for installation of this camera has the following features:
• Vibration-free
• No direct sunlight
Select a place for mounting which is not shielded by, for example,
reinforced concrete walls, steamed up mirrors or metal shelves.
There should be no devices with strong electrical fields, such as
mobile telephones, radios or electrical motors, close to the
device.
The above-mentioned occurrences can disturb the radio transmission appreciably
or limit its range.
Set up the receiver close to the surveillance monitor or television set, but not direct-
ly on the surveillance monitor itself. Under certain circumstances this influences the
wireless range considerably.
22
13) DC IN 5 V/DC 1A
14) Button Up
15) Menu button
16) Button Left
17) Button Down
18) Channel selection switch
19) Button Zoom ON/OFF
20) Button Right
21) Power LED
22) Pairing LED
23) LED signal