Changing A Key Type - Nortel Telephony Manager User Manual

Changing a key type

This procedure describes how to change a Conference (AO3) key to a
CFW key.
To change the function of a key from AO3 to CFW:
1. Scroll down the list of keys until the AO3 key is visible in the
section.
2. Select CFW from the drop-down list in the
selected key.
The Telephone Details
required parameters,
in the Key Value
3. Determine the maximum number of digits of your CFW DN.
4. Enter the maximum number of digits of your CFW DN into the
Redirection DN Length
5. To program the CFW DN by using the web display, enter the DN into
the Redirection DN
Note 1: You can also program the DN by using the CFW key after the
key is configured on your telephone.
Note 2: When you change a key type, the system default parameter
values for the new key type do not appear. If you specify a redirection
DN length that is greater than the system maximum, or if you specify
a redirection DN that has more digits than the system maximum, you
receive a validation error.
Figure 3: Entering the CFW parameters
6. Click Validate
page refreshes. The system displays the
Redirection DN Length
column. An edit box is provided for each parameter.
edit box. See Figure 3 on page 21.
edit box.
on the Telephone Details
Using Desktop Services
Key Type column for the
and Redirection
page.
Keys
DN,
21