Bay Networks 6300 Supplement Manual page 89

Book A
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
Port AppleTalk Parameters
at_guest: N
at_security: N
Port TN3270 Parameters
printer_host: 0.0.0.0
Port LAT Parameters
authorized_groups: none
multisessions_enable: N
To display the synchronous PPP global port parameters via admin, enter
the following from the superuser CLI.
annex3# admin
ANNEX-PRI Rx.x, 32 async, 32 sync, 32 ta, 32 modem ports
admin: show port syn
global port:
user_name: ""
ppp_username_remote: ""
slip_ppp_security: Y
ppp_ncp: atcp,ipcp,ipxcp,mp
metric: 1
ppp_mru: 1500
input_is_activity: Y
reset_idle_time_on: input
net_inactivity_units:minutes mp_mrru: 0
mp_endpoint_class: mac
In the above sample displays, the parameters that begin with the string
mp_ are related to Multilink PPP, which is not described in this
document. For information, see the Multilink PPP Addendum to the
Remote Annex Administrator's Guide for UNIX.
Chapter 3 Configuring the PRI Interface, Global Ports,
at_nodeid: 0.0
arap_v42bis: Y
printer_name: ""
latb_enable: N
port_password: "<unset>"
ppp_password_remote: "<unset>"
ppp_security_protocol: pap
subnet_mask: 0.0.0.0
inactivity_timer: off
output_is_activity: N
net_inactivity: off
mp_endpoint_address:
A-61