Vcli_Inactivity; Vcli_Password; Vcli_Security - Bay Networks 6300 Supplement Manual

Book C Chapter 2 Configuration Parameters

vcli_inactivity

This Annex parameter specifies the number of minutes that a virtual CLI
connection can remain inactive. If the number of minutes is exceeded,
the RA 6300 terminates the virtual CLI connection. Valid values are 1–
255 or off. The default is off, which specifies that no time limit is imposed
on VCLI connections.

vcli_password

This Annex parameter defines a password required for virtual CLI
connections to the RA 6300. The string size ranges from 0 to 15
characters. This parameter is useful for local password protection and as
a back-up to host-based security. For local password protection, set the
enable_security parameter to Y, set the vcli_security parameter to N,
and define a password for this parameter. As a back-up for host-based
security, setting this parameter causes the RA 6300 to request a password
on a virtual CLI connection whenever the security server does not
respond. The default is "<unset>".
Changes to this parameter take effect immediately.

vcli_security

This Annex parameter enables user validation on virtual CLI connections
to and from an RA 6300 for the duration of the connection. When enabled,
the RA 6300 enables connection security for all virtual CLI connections
and executes the same user validation, including user name and password,
that it uses with CLI security on asynchronous ports. This parameter
works with host-based security only when the enable_security parameter
is set to Y. A Y enables this parameter, an N disables it. The default is N.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-109