Table A-36. Arguments In The Acp_Restrict File Entries - Bay Networks 6300 Supplement Manual

Chapter 15 Using RA 6300 Security
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
A-270

Table A-36. Arguments in the acp_restrict File Entries

Argument Description
annex The name or IP address of the RA 6300 initiating the
access. This argument is supported for backward
compatibility with Release 10.1 and earlier releases but
is treated as if it were the profile criterion annex=annex
(profile_criteria are described next).
profile_criteria One or more keyword=value pairs, separated by
semicolons (;), specifying the conditions under which
the specified hosts will be restricted or unrestricted. For
information on entering profile_criteria, see
Criteria Syntax
: (colon) Indicates that the hosts listed in the same entry are
restricted. White space may follow, but not precede, the
colon.
~ (tilde) Indicates that the hosts are unrestricted. White space
may follow, but not precede, the tilde. For PPP and
SLIP connections, hosts specified as unrestricted imply
that all other hosts are restricted. (For a CLI connection,
hosts specified as unrestricted have no implications for
other hosts.)
restricted host The name or IP address of a restricted host (including
RA 6300s). The list of restricted hosts is separated by
commas; no white space is allowed. An asterisk (*)
can be used as a wild card in place of a host name or
the host part of an IP address.
(continued on next page)
on page 15-239.
Book A
Profile