Table C-9. Keywords For The Show Annex Command - Bay Networks 6300 Supplement Manual

Chapter 1 na Commands
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-22
Each keyword displays a subset of parameters:
• Table C-9 lists the keywords and associated parameters for the
show annex command.
• Table C-10 lists the keywords and associated parameters for the
show interface command.
• Table C-11 lists the keywords and associated parameters for the
show port command.
• Table C-12 lists the keywords and associated parameters for the
show pri command
• Table C-13 lists the keywords and associated parameters for the
show pri b command.

Table C-9. Keywords for the show annex Command

Keyword Parameters
all Displays all RA 6300 parameters.
appletalk a_router, default_zone_list, node_id, zone
generic inet_addr, subnet_mask, pref_load_addr, pref_dump_addr,
load_broadcast, broadcast_addr, load_dump_gateway,
load_dump_sequence, image_name, motd_file, config_file,
authoritative_agent, routed, server_capability,
disabled_modules, tftp_load_dir, tftp_dump_name,
ipencap_type, ip_forward_broadcast, tcp_keepalive,
option_key, session_limit, output_ttl
ipx ipx_frame_type, ipx_file_server, ipx_dump_username,
ipx_dump_passwd, ipx_dump_path, ipx_do_checksum
lat lat_key, facility_num, server_name, sys_location,
lat_queue_max, service_limit, keep_alive_timer,
circuit_timer, retrans_limit, group_value, vcli_groups,
multicast_timer, multisessions_enable
(continued on next page)
Book C