Server_Capability; Server_Name; Service_Limit; Table C-33. Valid Options For The Server_Capability Parameter - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-98

server_capability

This Annex parameter defines an RA 6300 as a file server host. An
RA 6300 can provide operational code only for another RA 6300.
Table C-33 describes the valid options; the default is none.

Table C-33. Valid Options for the server_capability Parameter

Option Description
all The RA 6300 is a file server for the configuration, operational
image, and message-of-the-day files.
config The configuration files.
image The RA 6300's operational code.
motd The message-of-the-day file.
none The RA 6300 is not a file server.

server_name

This Annex parameter names the RA 6300 in the LAT protocol. The name
should match the NMS host's node name used in the HIC configuration
file. The string size ranges from 1 to 16 characters. The default value is
the physical Ethernet address, represented as a hexadecimal value,
appended to the string LAT_ (for example, LAT_080002BF0020).

service_limit

This Annex parameter defines the maximum number of LAT services that
an RA 6300 can maintain in its local service table. When the table is full,
the RA 6300 removes the service that has been idle longest. If all services
are busy and the table is full, the RA 6300 discards a new service.
Allowable values range from 16 to 2048. The default is 256.
Book C