Input_Is_Activity; Input_Start_Char; Input_Stop_Char; Ipencap_Type - Bay Networks 6300 Supplement Manual

Book C Chapter 2 Configuration Parameters

input_is_activity

This asynchronous port parameter defines activity as input. When
enabled, the RA 6300 sets the inactivity timer when it receives input at
the port. A Y enables this parameter, an N disables it. The default is Y.
input _ start _ char
This asynchronous port parameter defines the control character sequence
that restarts input if the input_flow_control parameter is set to start/
stop. The default is .
CTRL-Q (^Q)
input _ stop _ char
This asynchronous port parameter defines the control character sequence
that stops input if the input_flow_control parameter is set to start/stop.
The default is .
CTRL-S (^S)

ipencap_type

This Annex parameter specifies whether the RA 6300 LAN interface
encapsulates IP packets in the Ethernet Version 2 format or the IEEE
802.3 Data Link Layer format. The values for this parameter are ethernet
or ieee802. The default is ethernet.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-59