Bay Networks 6300 Supplement Manual page 270

Chapter 15 Using RA 6300 Security
Protocol
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
A-242
The first example specifies all internal asy ports (asynchronous ports) on
annex03.
In the second example, annex=* is implied and the user can access all
internal syn ports (synchronous PPP ports) on all RA 6300s.
In the third and fourth examples, ports=* is implied. The fourth example
specifies all ports on all RA 6300s, which is the default.
You cannot abbreviate the ports keyword.
The protocol criterion lets you control security based on the protocol
used to attempt access to a host or host port. Valid values are:
• slip
• ppp
• cli (for telnet and rlogin)
Specify a protocol criterion using the syntax:
protocol=protocol_name
To specify more than one protocol, you must specify multiple security
profile definitions. For example, to specify both PPP and SLIP, enter:
protocol=ppp
protocol=slip
The default is any protocol.
Book A