Do_Compression; Dsx1_Line_Length; Echo - Bay Networks 6300 Supplement Manual

Supplement to the remote annex administrator’s guide for unix

Hide thumbs Also See for 6300:

Table of Contents

Conﬁguration Parameters

do_compression

This asynchronous port parameter starts TCP/IP header compression on

a SLIP link. When enabled, the RA 6300 negotiates for TCP/IP

compression for both sides of the connection. A Y enables this parameter,

an N disables it. The default is N.

This PRI line parameter speciﬁes the approximate distance, in meters,

from the RA 6300 PRI interface to the external CSU. Enter this as a range,

e.g., 0–25, as a single number, e.g., 30, or as a unique part of a range,

If you enter a single number, the RA 6300 picks the range that the number

falls into. (You can then use the pri show command to determine the

range assigned.) Valid ranges are: 0–25, 26–65, 66–100, 136–185, 166–

185, and 186–210. The default is 0-25.

his asynchronous port parameter directs an RA 6300 to echo all

characters as a user types. This echo occurs only at the CLI level. A Y

enables this parameter, an N disables it. The default is Y.

Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX