Bay Networks 6300 Supplement Manual page 574

Chapter 4 Utilities
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-118
Table C-36. Supported Arguments for erpcd (continued)
Argument Description
–x max_total The number of non-consecutive login failures a user is
permitted before being blacklisted. Valid values are 0-20.
A value of 0 enables blacklisting upon any login failure
(not recommended). This value can also be set via the
MAX_BL_NONCON variable in acp_policy.h. The
default, as pre-set by MAX_BL_NONCON, is 10. If
MAX_BL_NONCON is undefined and you do not specify
–x max_total, ACP never blacklists based on consecutive
login failures. For more information, see Configuring
Blacklisting on page A-286.
–g period The time period, in weeks, over which max_total is
applied. Login failures that occurred more than this
number of weeks ago do not count toward blacklisting.
Valid values are 0-52. his value can also be set via the
MAX_BL_NONCON variable in acp_policy.h. The
default, as pre-set via MAX_BL_PERIOD, is 26. If
MAX_BL_PERIOD is undefined or is set to 0,
MAX_BL_NONCON is effectively disabled. For more
information, see Configuring Blacklisting on page A-286.
–lL ACP logfile information directed to syslog.
-l turns it off; -L turns it on.
–aA ACP logfile. -a turns it off; -A turns it on.
–n Use host name instead of IP address in logfile.
–tT ACP log information stamped with date/second.
-t use seconds;-T use standard time format.
–v Displays software version number.
Book C