Motd_File; Multicast_Timer; Multisessions_Enable; Name_Server_1 - Bay Networks 6300 Supplement Manual

Book C Chapter 2 Configuration Parameters
motd_file
This Annex parameter defines the file name for the message-of-the-day
file maintained on the load host. The string size ranges from 0 to 16
characters. The default file name is motd; the file resides in the directory
chosen during the host installation process (typically
/usr/spool/erpcd/bfs).

multicast_timer

This Annex parameter defines the number of seconds that can elapse
between service announcement transmissions for the LAT protocol.
Allowable values range from 10 to 180 (seconds). The default is 30.

multisessions_enable

This Annex parameter allows multisessions to be managed on a terminal
server basis. When enabled, terminals that support DEC's Terminal
Device/Session Management Protocol (TD/SMP) can display two active
windows simultaneously over one communication line. A Y enables this
parameter, an N disables it. The default is N.

name_server_1

This Annex parameter defines the type of name service used with the
primary name server. When using this parameter, you must specify a host
using the pref_name1_addr. The options are dns, ien_116, or none. The
default is none.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-75