Table of Contents
Advertisement
Table 69
Port List menu
Command
add
modify
delete
Table 70
Multicast Bypass menu
Command
enable
Port List menu
Using the Port List menu (/cfg/smc/settings/portbypass/portlist), you can add,
modify, and delete IP addresses from list of ports to bypass.
Table 69 identifies and describes the Port List menu commands.
Description
Adds the IP address you specify to the port list.
Modifies the IP address you specify.
Deletes the IP address you specify from the port list.
Multicast Bypass menu
Using the Multicast Bypass menu (/cfg/smc/settings/multicast), you can
identify a specific multicast groups for which you want the SMC to bypass
the processing and bridge the packets onto another network. When the
Multicast Bypass feature is enabled, the SMC bridges all packets matching
the mcastlist from their source network to their destination network. You can
add, modify, and delete the multicast addresses, source network, and
destination network you want to bridge.
You can configure up to a maximum of eight multicast groups along with
their source and destination network.
Table 70 identifies and describes the Multicast Bypass menu commands.
Description
Enables the Multicast Bypass feature.
Configuration menu
Secure Multimedia Controller
Page 99 of 126
Command Reference
Advertisement
Table of Contents
