Table of Contents
Advertisement
Table 28
SNMP Administration menu (/cfg/sys/adm/snmp)
Command
ena
dis
model v1 | v2c |
usm
level auth | priv
access d | r
events y | n
alarms y | n
Table 28 identifies and describes the SNMP Administration menu
commands.
Description
Enables SNMP features.
Disables SNMP features.
Specifies the form of SNMP security:
• v1: SNMP version 1
• v2c: SNMP version 2C security model
• usm: SNMP version 3 User-based Security Model (USM)
Specifies the desired degree of SNMP USM security:
• none: no security.
• auth: Verify the SNMP user password before granting SNMP access.
SNMP information is transmitted in plain text.
• priv: Verify the SNMP user password before granting SNMP access and
encrypt all SNMP information with the user's individual key.
Use this command when usm is selected using the Model command.
USM user names, along with their passwords and encryption keys, are
defined in the SNMP Users menu (/cfg/sys/adm/snmp/users) on
Enables or disables access for the read community.
Enables or disables the automatic delivery of event messages to the SNMP
trap hosts. When enabled, messages regarding general occurrences, such
as detection of new components, are sent.
Enables or disables the automatic delivery of alarm messages to the SNMP
trap hosts. Alarm messages indicate serious conditions that can require
administrative action.
Configuration menu
Secure Multimedia Controller
Page 51 of 126
page
52.
Command Reference
Advertisement
Table of Contents
