Table of Contents
Advertisement
Inbound Access menu
Table 57
Inbound Access menu
Command
enable
source
dest
service
custom
action
flow
Using the Inbound Access menu (cfg/smc/irule<rule_number>), you can
specify inbound access rules.
Table 57 identifies and describes the Inbound Access menu commands.
Description
Enables or disables the rule. Disabled rules are ignored.
Specifies the source network for the traffic. The source network is generally
located within the intranet and is untrusted. If the source value is an
asterisk (*), all source IP addresses match this rule.
Specifies the destination network for the traffic. For an inbound rule, this
represents the subnet of the security zone, or individual IP addresses
within the zone. If the dest value is an asterisk (*), all destination addresses
match this rule.
Details the protocol (TCP, UDP, ICMP) and ports for the traffic that matches
this rule. If the service value is an asterisk (*), all types of traffic match this
rule.
Displays the Custom Service menu, which you can use to define custom
services for individual rules. You can specify the minimum port, maximum
port, and protocol of the service. If you specify a custom service, it
overrides the normal service specification.
Specifies whether to allow or deny traffic for this rule.
Displays the Flow Control menu, which you can use to specify flow control
for the specified rule. The flow control applies only to this individual rule
and the traffic that maps to it. For menu items, see "Flow Control menu" on
page
86.
Configuration menu
Secure Multimedia Controller
Page 85 of 126
Command Reference
Advertisement
Table of Contents
