Table of Contents
Advertisement
Page 66 of 126
Configuration menu
Table 41
System Log menu
Command
email <e-mail address>
smtp <SMTP server IP address>
int <days> <hours>
size <max size (kb)>
NN10300-091
Standard 1.00
System Log menu
Using the System Log menu (/cfg/sys/log/arch/syslog), you can configure
system log parameters. The system logs contain information and errors
generated during standard system operation.
Table 41 identifies and describes the System Log menu commands.
Description
Specifies the e-mail address to which log files are sent
when the log interval or maximum log size is reached. Use
this command in conjunction with the SMTP command.
Specifies the IP address of the SMTP mail server that
hosts the e-mail address specified in the Email command.
Specify the IP address in dotted decimal notation.
Note: Configure the specified SMTP server to accept
messages from the SMC.
Specifies the time interval for log rotation. The interval is
specified in number of days and number of hours.
Specifies the maximum size a log file can reach before
triggering rotation. The size is specified in kilobytes.
Firewall Log menu
Using the Firewall Log menu (/cfg/sys/log/arch/firewall), you can configure
firewall log parameters.
The firewall log contains all logging related to the firewall operation. The log
includes details on attacks and basic firewall operation, if configured. The
messages sent to the firewall logs are defined in the Platform Logging menu
(smc/settings/log/). You can also specify firewall logging for individual
packets that traverse the SMC by enabling logging in the security zone rules
(either inbound or outbound).
May 2006
Advertisement
Table of Contents
