Table of Contents
Advertisement
Page 32 of 126
Configuration menu
System menu
Table 10
System menu (/cfg/sys)
Command
time
dns
cluster
accesslist
adm
NN10300-091
Standard 1.00
Using the System menu (/cfg/sys), you can configure system-wide
parameters.
Table 10 identifies and describes the System menu commands.
Description
Configures the date, time, time zone, and Network Time Protocol
(NTP). For menu items, see "Date and Time menu" on
Changes Domain Name System (DNS) parameters. For menu items,
see "DNS Servers menu" on
Displays the Host Information menu, which you can use to configure
the host IP address and cluster management IP (MIP) address for the
SMC host. You can also assign a physical port to the SMC host. For
menu items, see "Cluster menu" on
Displays the Access List menu, which you can use to restrict remote
access to SMC management features. You can add, delete, or list
trusted IP addresses that are allowed Telnet, Secure Shell (SSH), or
Browser-Based Interface (BBI) access to the SMC. For menu items,
see "Access List menu" on
Displays the Administrative Application menu, which you can use to
configure idle timeout and SMC remote management features such as
Telnet, SSH, SNMP, and BBI. For menu items, see "Administrative
Applications menu" on
May 2006
page
35.
page
36.
page
39.
page
41.
page
33.
Advertisement
Table of Contents
