Table 31
SNMP System Information menu
Command
contact <new string,
maximum 64 characters>
name <new string,
maximum 64 characters>
loc <new string, maximum
64 characters>
SNMP System Information menu
Using the SNMP System Information menu (/cfg/sys/adm/snmp/system),
you can configure basic identification information such as support contact
name, system name, and system location.
Table 31 identifies and describes the SNMP System Information menu
commands.
Description
Configures the name of the system contact. The contact can have
a maximum of 64 characters.
Configures the name for the system. The name can have a
maximum of 64 characters.
Configures the name of the system location. The location can
have a maximum of 64 characters.
Configuration menu
Secure Multimedia Controller
Page 55 of 126
Command Reference