Table of Contents
Advertisement
Administrative Applications menu
Table 17
Administrative Application menu (/cfg/sys/adm)
Command
idle <CLI time-out period in
seconds (300-604800)>
telnet
ssh
Using the Administrative Applications menu (/cfg/sys/adm), you can enable
the SMC remote management features such as Telnet, SSH, SNMP, and the
BBI.
Table 17 identifies and describes the Administrative Application menu
commands.
Description
Specifies the amount of time, in terms of seconds, that a CLI
or BBI session can remain inactive before automatically
logging off. The default value is 300 seconds, which equates
to 10 minutes. The maximum is 604800.
If a user makes changes to the SMC configuration and the
CLI or BBI times out before the user applies them, all
changes are lost.
Enables or disables Telnet sessions for remote access to the
SMC management CLI. For menu items, see "Telnet
Administration menu" on
You need to add an entry into the access list for the client
before it can administer the SMC through Telnet. See
"Access List menu" on
Enables or disables Secure Shell (SSH) for remote access to
the SMC management CLI. You can also generate SSH host
keys. For menu items, see "SSH Administration menu" on
page
43.
You need to add an entry into the access list for the client
before it can administer the SMC through SSH. See "Access
List menu" on
Configuration menu
page
page
39.
page
39.
Secure Multimedia Controller
Page 41 of 126
42.
Command Reference
Advertisement
Table of Contents
