Table of Contents
Advertisement
Page 42 of 126
Configuration menu
Table 17
Administrative Application menu (/cfg/sys/adm)
Command
web
snmp
audit
auth
NN10300-091
Standard 1.00
Description
Configures the Browser-Based Interface (BBI). The BBI
provides HTTP or Secure Sockets Layer (SSL) access for
remote management of the SMC using a Web browser. For
menu items, see "Web Administration menu" on
You need to add an entry into the access list for the client
before it can administer the SMC through the BBI. See
"Access List menu" on
Controls Simple Network Management Protocol (SNMP)
read access and enables or disables SNMP event and alarm
messages for the SMC. You can also define SNMP
information, permission levels, and traps. For menu items,
see "SNMP Administration menu" on
You need to add an entry into the access list for the client
before it can issue requests to the SMC through SNMP. See
"Access List menu" on
Configures the servers to receive log messages on the
commands executed in the CLI and the Web user interface
(UI). For menu items, see "Audit menu" on
Configures RADIUS authentication. For menu items, see
"Authentication menu" on
Telnet Administration menu
Using the Telnet Administration menu (/cfg/sys/adm/telnet), you can enable
or disable remote Telnet access to the SMC CLI. By default, Telnet access is
disabled.
Note: Telnet is not a secure protocol. All data (including the password)
between a Telnet client and the SMC is unencrypted and
unauthenticated. Depending on the severity of your security policy, you
can enable Telnet access and restrict it to one or more trusted clients.
May 2006
page
39.
page
page
39.
page
page
59.
page
45.
50.
56.
Advertisement
Table of Contents
