Table of Contents
Advertisement
Table 42
Firewall Log menu
Command
email <e-mail address>
smtp <SMTP server IP address>
int <days> <hours>
size <max size (kb)>
Table 42 identifies and describes the Firewall Log menu commands.
Description
Specifies the e-mail address to which log files are sent
when the log interval or maximum log size is reached. Use
this command in conjunction with SMTP command.
Specifies the IP address of the SMTP mail server that
hosts the e-mail address specified in the Email command.
Specify the IP address in dotted decimal notation.
Note: Configure the specified SMTP server to accept
messages from the SMC.
Specifies the time interval for log rotation. The interval is
specified in number of days and number of hours.
Specifies the maximum size a log file can reach before
triggering rotation. The size is specified in kilobytes.
UNIStim Log menu
Using the UNIStim Log menu (/cfg/sys/log/arch/unistim), you can configure
UNIStim log parameters.
The secure UNIStim log contains all logging related to the secure UNIStim
proxy and includes general information about its operation. The log also
contains messages related to execution problems and security failures in the
secure UNIStim protocol.
Configuration menu
Secure Multimedia Controller
Page 67 of 126
Command Reference
Advertisement
Table of Contents
