Emc Requirements; Prohibition Of Modifications To The Device; Materials - Lauda LOOP 100 Operation Manual

1.4

EMC requirements

Table 1: Classification in accordance with EMC requirements
Device
Table 2 (Industrial) in accord-
LOOP
Instructions for Class A digital device, USA
Instructions for Class A digital device,
Canada
1.5

Prohibition of modifications to the device

1.6

Materials

6 / 41
The following are considered cases of foreseeable misuse:
Operating the device without heat transfer liquid

Operating the device with an incorrect, flammable heat transfer liquid

Incorrect connection of hoses.

Immunity requirements
ance with EN 61326-1
"This equipment has been tested and found to comply with the limits for
Class A digital device, pursuant to Part 15 of the FCC (Federal Communica-
tion Commission) Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the
interference at his own expense."
"This Class A digital apparatus complies with Canadian ICES-003" (ICES =
Interference Causing Equipment Standards).
« Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada ».
Any technical modification of the device by the user is prohibited. Any
damage resulting from unauthorized modification is not covered by customer
service or the product warranty. Service work may only be performed by the
LAUDA Service department or a service partner authorized by LAUDA.
All parts that come into contact with heat transfer liquid are manufactured
from high-quality materials adapted to withstand the operating temperature.
Stainless steel, copper, silicone (hoses) and premium-quality heat-resistant
plastics are used.
Emissions class
Emissions Class B in accord-
ance with CISPR 11
LOOP
Customer power supply
Worldwide
No limitation
V3