Table of Contents
Advertisement
Maintenance
DISPLAY STATUS (D S)
Introduction
The DISPLAY STATUS OR D S command displays the status of each channel
served by the HLC. Supervisors who need to know how the HLC is being
utilized use this command.
Possible conditions reportable via this command are
Inactive
Online, Inactive
Online, Active
To display the status of each channel on an HLC
1
If you are not already logged in, log in to the MMI.
See "LOGIN (L)" on page 91.
Result: The MMI presents you with the logged-on command prompt.
(See "Command prompts" on page 91.)
2
At the command prompt, type DISPLAY STATUS or D S and press Enter.
Result: The MMI's display of the status of each channel on the HLC is
similar to the following figure:
Wed, 05-26-1999
HLC::>di s
Channel
0: Agent
Channel
1: Online, Active
Channel
2: Inactive
Channel
3: Online, Inactive
Channel
4: Online, Inactive
Channel
5: Online, Inactive
Channel
6: Online, Inactive
Channel
7: Online, Active
Channel
8: Online, Inactive
Channel
9: Online, Inactive
Channel 10: Online, Inactive
Channel 11: Online, Inactive
Channel 12: Online, Inactive
Channel 13: Online, Inactive
Channel 14: Online, Inactive
Channel 15: Online, Inactive
Wed, 05-26-1999
HLC::>
110
1:28:09
0, Online, Inactive
1:30:51
Standard 01.02
Meridian HomeOffice II
Advertisement
Table of Contents
