Display Logs - Nortel Remote Office 9110 Release Note

Standard 1.1
Module Number
On page 290 of the Remote Office 9150 Installation and Administration Guide
(NTP 555-8421-215), the field description for Module Number does not provide
the correct field description for the Remote Office 9150 unit. The field
description should read as follows:
Identifies this DSP Application Module's module number on the
Remote Office 9150 unit. Valid options are: 0, 1, 2, and 3.
TELCO 2 connector pin-out table
On page 377 of the Remote Office 9150 Installation and Administration Guide
(NTP 555-8421-215), "Fault Relay" should read "unused".

Display Logs

Page 445 of the Remote Office 9150 Installation and Administration Guide
(NTP 555-8421-215) should now include Display Log definitions for Display
Log 84 through 95. Although this guide does not contain these definitions, you
can refer to the Remote Office Configuration Manager help file for the Display
Log details. Display Log 93 now includes a field for the DN of the digital
telephone set that dialed the emergency access code.
MCA support
On page 22 of the Remote Office 911x Series Installation and Administration
Guide (NTP 555-8421-220) the following note appears:
Note: Remote Office 9110 units do not support Meridian
Communication Adapters (MCAs). Remote Office 9115 units
support Meridian Communication Adapters (MCAs) to allow
computer telephony integration (CTI) control of digital
telephones operating in transparent mode. Remote Office 911x
series units do not support Analog Telephone Adapters (ATAs).
82 1.4.2 Release Notes for Remote Office and RLC